A live edge suar wood dining table from Bali is bought piece by piece, not from a catalogue. Every slab comes off one rain tree (suar, Albizia saman), so its width, its grain figure and the wandering line of its natural edge exist on that table and nowhere else. The same is true of teak root consoles, which are carved from the stump and root ball left in the ground after plantation teak has been harvested. This page explains what these statement pieces cost at export prices, how our desk sells them, and how to reserve one and ship it to your country.
Because nothing in this collection repeats, we sell it the way a gallery sells work rather than the way a webshop sells chairs. Each available piece is photographed individually: full slab, edge detail, base, and a dimension sheet with thickness and a moisture reading. It is then reserved by enquiry, and the first buyer to confirm a deposit holds the piece. There is no cart and no stock counter; this reservation flow exists only for this collection, precisely because no piece can be reprinted once it is gone.
Buy Bali Furniture Online is the curation and booking desk for the collection. We are an English-language specialist desk within Juara Holding Group, a Bali-based group operating since 2015, and we arrange selection, finishing, quality control, crating and export through the group’s network of slab yards and carving workshops in Bali and Jepara. Realistic budgets start around USD 350 FOB for a compact live-edge coffee table and pass USD 900 FOB for wide single-slab dining tables; the full price guidance is further down this page.
What Is in the Collection
The core of the collection is suar slab work and teak root carving. Typical pieces include:
- Live-edge suar dining tables: single slabs of 200–300 cm, usually 7–10 cm thick, mounted on black steel, stainless or carved wooden pedestal bases.
- Teak root consoles: 120–180 cm hall and entry pieces in which the root structure is cleaned, stabilised and levelled beneath a flattened top.
- Live-edge benches and coffee tables: smaller slabs and offcuts from the same trees, sometimes available as bookmatched pairs.
- Counters, desk tops and monumental slabs: reception counters, bar tops and slabs above 300 cm, usually cut for architects, villas and hotel projects.
Slabs are kiln-dried before finishing, then hand-sanded and sealed with a low-sheen polyurethane or a hardwax oil, depending on how much of the raw surface you want to feel under your hand. For how suar behaves next to teak, mahogany, rattan and reclaimed timber, see our furniture materials guide.
A Reservation Flow, Not a Shopping Cart
One-off pieces cannot honestly be sold with a buy button, because two buyers can want the same slab in the same week. So the flow works like this: you tell us what you are looking for, including a size range, a budget and the room the piece will stand in, and we reply with photographs of the actual pieces currently available, each with its dimension sheet and exact FOB price. If one of them is right, a deposit reserves it in your name and it comes off the list the same day.
If nothing in current stock fits, there is a second route. The workshops hold kiln-dried slabs that have not yet been finished. We photograph raw slabs in your size bracket, you choose one, and the workshop cuts, finishes and mounts it on the base you specify. That custom route takes six to ten weeks instead of two to four, and it is how most dining tables over 250 cm are bought.
How Our Desk Arranges It Through the Group
We are open about what we are: a curation and booking desk, not a factory. We do not own sawmills or carving sheds. What we bring is the working relationship: the group has worked with Indonesian workshops and suppliers since 2015, and our desk handles the parts of the transaction that most often go wrong when an overseas buyer deals with a workshop directly. That means piece selection against honest photographs, price negotiation in rupiah, moisture checks before finishing, staged quality-control photos, export-grade crating and the shipping documents your customs broker will ask for.
That structure comes from the wider group. Buy Bali Furniture Online is one desk inside Juara Holding Group’s brand network, which runs specialist export and travel desks across Indonesia, and the group’s track record is published openly. For you as a buyer, the practical meaning is simple: one English-speaking contact, one written quotation, and accountability that does not disappear after the deposit is paid.
Realistic Price Guidance (FOB Indonesia)
The figures below are FOB, meaning the price of the finished, crated piece loaded at the Indonesian port. International freight, insurance and import charges in your country are quoted separately. Ranges reflect current workshop pricing across the network; every individual piece is quoted exactly before you commit.
| Piece | Typical size | Typical FOB range (USD) |
|---|---|---|
| Live-edge suar coffee table | 100–140 cm | 350–550 |
| Live-edge suar bench | 150–200 cm | 350–600 |
| Teak root console | 120–180 cm | 400–750 |
| Live-edge suar dining table, single slab | 200–250 × 90–110 cm | 550–900 |
| Teak root dining base with glass top | seats 6–8 | 450–850 |
| Monumental slabs and counters | 300 cm and above | Quoted per piece, usually above 900 |
Three variables move the price more than anything else. Thickness: the step from a 7 cm slab to a 10 cm slab can change the timber cost by a third. Base: fabricated stainless steel costs more than powder-coated mild steel or a carved wooden pedestal. Grade: slabs with unbroken width, dramatic figure and no heart cracks sit at the top of each range, and plainer slabs at the bottom.
How to Reserve and Ship a Piece
- Enquire. Message us on WhatsApp at +62 811-3941-4563 or email bd@juaraholding.com with your size range, budget and destination country.
- Review current pieces. We send photographs, dimension sheets and exact FOB prices for available pieces, along with a freight estimate to your port or door.
- Reserve with a deposit. A deposit, typically 50 per cent, takes the piece off the market. You receive a written confirmation naming the piece, its dimensions and the agreed total.
- Finishing and quality control. The workshop completes finishing and mounting. You receive staged photographs, including moisture readings and the finished piece before it is crated.
- Crating and dispatch. The piece is export-crated for sea freight. The balance is due before dispatch; transit for a single table usually runs two to six weeks depending on destination.
- Documents. You receive the bill of lading, packing list, commercial invoice and the timber-legality paperwork needed for customs clearance.
In-stock pieces are normally crated within two to four weeks of deposit. Custom pieces take six to ten weeks before shipping.
Frequently Asked Questions
How much does a live edge suar wood dining table from Bali cost?
At export (FOB) prices, most single-slab suar dining tables between 200 and 250 cm fall between USD 550 and 900. Compact pieces such as coffee tables and benches start around USD 350, and monumental slabs over 300 cm are quoted individually, usually above USD 900. International freight is additional and quoted per destination.
Will a suar slab crack or warp in my climate?
Some movement is in the nature of a solid slab, and any seller who promises none is overselling. What controls it is drying and construction: slabs are kiln-dried to interior moisture levels before finishing, thick pieces are fitted with steel C-channels or butterfly keys across natural checks, and the finish is chosen to slow moisture exchange. In centrally heated or very dry climates, keep the table away from direct heat and expect the possibility of hairline surface checks over time; they are normal in this category and do not affect the structure of a properly built table.
Can I buy just one table, or do I need to fill a container?
One piece is fine. Single tables ship as crated LCL (shared-container) cargo, which we arrange port to port or door to door. Buyers furnishing a whole property often combine one or two slab pieces with a larger mixed order in a shared or full container, which brings the freight cost per piece down considerably.
Can a slab be finished to my measurements?
Yes. If nothing in current stock fits, we photograph raw kiln-dried slabs in your size bracket and the workshop finishes your chosen slab to specification, covering final length, base design and finish. Allow six to ten weeks from deposit to crating for custom work.
Are suar and teak root pieces legal and responsible to export?
Suar is a fast-growing shade and estate tree planted widely across Indonesia, not a protected rainforest species. Teak root pieces are carved from stumps left in the ground after plantation teak harvesting, material that would otherwise be burned or left to rot. Export shipments travel with documentation under Indonesia’s SVLK timber-legality scheme, which we arrange as part of the export paperwork.
Can these pieces live outdoors?
No. Suar is an interior timber, and sun and rain will open its grain and grey the surface quickly. Keep slab tables and root consoles inside or on a fully enclosed veranda. For terraces, gardens and pool decks, plantation teak is the right material; you will find those pieces in our outdoor furniture collection.
Enquire About Current Pieces
The available list changes week by week, and the best slabs rarely stay on it long. Send us the length you need, your budget band and a photo of the room if you have one, and we will reply with the pieces currently on the floor: real photographs, real dimensions, exact FOB prices and a freight estimate to your address. Message the desk on WhatsApp at +62 811-3941-4563 or email bd@juaraholding.com, and we will come back to you within one working day.